Download Tecno F2 LTE Fast Boot,Dead Boot,Hang On Logo Official Fix Firmware 100% Tested


This firmware solve issues like 
-Calibration/Touch pad not working after flashing
-Deadboot issues
-Unlocking issues
-Monkey Virus issues
ETC
Tested @ My Workshop  Dorado Soft Touch GSM Clinic

File Informations
File Name: {DST-Gsm} Tecno F2 LTE Signed Firmware 100% Clean (F2LTE-H394ABC-Go-180614V124).
File Size: 746MB
Password: Yes< Paid +2348027277982
DOWNLOAD


File Informations
File Name: {DST-Gsm} Tecno F2LTE-H394ABC-OGo-200321V285 
File Size: 820MB
Password: Yes< Paid +2348027277982
DOWNLOAD


Flashing/Installer Guideline

1st Step: Download Your Targeted Flash File/Stock Rom. Recheck Your Model & Version.
2nd Step: Download Smartphone (SP) Flash Tools Or Supported Flash Tools.
3rd Step: Download Mediatek Usb Driver.Must be Your smartphone Model Supported
4th Step: Unzip download flash firmware/Stock Rom.
5th Step: Setup Usb Android Mediatek smartphone Driver.(Skip Already Install driver.)
6th Step: Setup/open Mediatek smartphone Flash Tools.
7th Step: Open Smartphone (SP) Flash Tool.
8th Step: Load your Targeted model scatter/Document file.Then All File Auto Select .
9th Step: Battery Charge minimum 50%.Its important issue for Flash.
10th Step:Connect Usb Cable with Pc.
11th Step: Press Flash/Download/Upgrade Button.
12th Step: Reconnect Battery.
13 Step: Press Volume – or Boot key & inset usb Cable.
14th Step: Wait 3-8 Minute For Flash Done
  Firmware Fixed Below Issues
Pattern Lock solution.
Password Lock Problem Fixed.
Privacy Lock Solution.
Application Lock Solution.
Screen Lock Problem Fixed.
FRP Lock (Google Account Lock) (Type Email & Password & Press Next) Problem Fixed.
Hang On Logo Problem Fixed.
Dead phone Recovery.
Unfortunately, Any Apps has Been Stoped.
Heat Problem Fixed.
Auto On Off Problem Solution.
White Screen Problem Solution.
Blank OR Black Screen Problem Fixed.

0 Comments