Azumi V5+ Pac Stock Rom Firmware 100% Tested

Firmware is original factory stock firmware so it can be flash with any spd flash tool.

Display ID     : P00610 release-keys
Ver. Incmt     : 1551241608
Ver. CodeName  : REL
Ver. Release   : 9
Sec. Patch     : 2019-01-05
Build Time     : 1551241608
Product Model  : V5+
Product Brand  : Azumi
Product Name   : V5PLUS_AC27
Product Device : AZUMI_V5PLUS_AC27
Product Manfct : Azumi
Product Info   : AZUMI_V5PLUS_AC27
Product Board  : sp9832e_1h10_32b
Board Platform : sp9832e
Display ID     : AZUMI_V5+_SW_V01
Product Model  : V5+
Product Brand  : Azumi
Product Name   : V5PLUS_AC27
Product Device : AZUMI_V5PLUS_AC27
Product Info   : Azumi_V5PLUS
Product Board  : V5PLUS
File Informations
File Name: AZUMI_V5+_LS_Vod_V01S_20190227_B1&_B8_By_DST-Gsm_20200612
File Size: 980MB
Password:Yes Call,Text/Chat +2348037277982

 These are the instructions to flash .Pac Stock ROM on any android Smartphone using Spreadtrum Upgrade Tool.
Remember: Your Android device should have at least 40-50 percent of battery to perform the flashing process. 
Flash Pac Stock Rom on Android Smartphone 
Step 1: Download and Install Spreadtrum USB Driver on your Computer. If in case Spreadtrum Driver is already installed on your computer then SKIP this Step.
Step 2: Download Stock Rom (.pac) for your Android Device.
Step 3Download and extract Spreadtrum Upgrade Tool on your computer. After extracting,you will be able to see many files.
Step 4: Now, open UpgradeDownload.exe.
Step 5: Once Spreadtrum Upgrade Tool is launched, connect your Android device to the computer (make sure your device is switch off).
Step 6: Once your Smartphone is connected successfully to the computer, click on the Load Packed Button and add the .pac file (stock rom which comes as pac).
Step 7: Once you have successfully added the Pac file in Spreadtrum Upgrade Tool, click on the Start Downloading button to begin the flashing (hold download button to start the flashing process,the button usually up or down button and plug in your cable to begin flashing).
Step 8: Once flashing is completed, you will be able to see the Green Passed Message in Spreadtrum Upgrade Tool.
Step 9: Now you have successfully flashed your Android Device using Spreadtrum Upgrade Tool.
     Once you see the Green Passed Message,Disconnect it and ON your phone.Go to Settings > About Phone > Check firmware.
Then you are Good to go........Enjoy.