THIS FILE IS ONLY FOR A56 W6004 FRP
File InformationsFile Name: {DST-Gsm} Itel A56 W6004 Frp Unlock File ( For Old/First Relased A56 Phone)
File InformationsFile Name: Itel A56 W6004-SP591-9.0-OP-V013-20200907 Frp File By DST-Gsm
File InformationsFile Name: Itel A56 W6004-SP591-9.0-OP-V014-20201017 FRP Unlock File By DST-Gsm
NOTE: For Frp Unlock File,Always Note Your Device Info By Putting To Recovery....Thanks
HOW TO INSTALL THIS ROM
These are the instructions to flash .Pac Stock ROM on any android Smartphone using Spreadtrum Upgrade Tool.
Remember: Your Android device should have at least 40-50 percent of battery to perform the flashing process.
Flash Pac Stock Rom on Android Smartphone
Step 1: Download and Install Spreadtrum USB Driver on your Computer. If in case Spreadtrum Driver is already installed on your computer then SKIP this Step.
Step 2: Download Stock Rom (.pac) for your Android Device.
Step 3: Download and extract Spreadtrum Upgrade Tool on your computer. After extracting,you will be able to see many files.
Step 4: Now, open UpgradeDownload.exe.
Step 5: Once Spreadtrum Upgrade Tool is launched, connect your Android device to the computer (make sure your device is switch off).
Step 6: Once your Smartphone is connected successfully to the computer, click on the Load Packed Button and add the .pac file (stock rom which comes as pac).
Step 7: Once you have successfully added the Pac file in Spreadtrum Upgrade Tool, click on the Start Downloading button to begin the flashing (hold download button to start the flashing process,the button usually up or down button and plug in your cable to begin flashing).
Step 8: Once flashing is completed, you will be able to see the Green Passed Message in Spreadtrum Upgrade Tool.
Step 9: Now you have successfully flashed your Android Device using Spreadtrum Upgrade Tool.
Once you see the Green Passed Message,Disconnect it and ON your phone.Go to Settings > About Phone > Check firmware.
Then you are Good to go........Enjoy.
File Informations
File Name: {DST-Gsm} Itel A56 W6004 Frp Unlock File ( For Old/First Relased A56 Phone)
File Informations
File Name: Itel A56 W6004-SP591-9.0-OP-V013-20200907 Frp File By DST-Gsm
File Informations
File Name: Itel A56 W6004-SP591-9.0-OP-V014-20201017 FRP Unlock File By DST-Gsm
NOTE: For Frp Unlock File,Always Note Your Device Info By Putting To Recovery....Thanks
HOW TO INSTALL THIS ROM
Remember: Your Android device should have at least 40-50 percent of battery to perform the flashing process.
Flash Pac Stock Rom on Android Smartphone
Step 1: Download and Install Spreadtrum USB Driver on your Computer. If in case Spreadtrum Driver is already installed on your computer then SKIP this Step.
Step 2: Download Stock Rom (.pac) for your Android Device.
Step 3: Download and extract Spreadtrum Upgrade Tool on your computer. After extracting,you will be able to see many files.
Step 4: Now, open UpgradeDownload.exe.
Step 5: Once Spreadtrum Upgrade Tool is launched, connect your Android device to the computer (make sure your device is switch off).
Step 6: Once your Smartphone is connected successfully to the computer, click on the Load Packed Button and add the .pac file (stock rom which comes as pac).
Step 7: Once you have successfully added the Pac file in Spreadtrum Upgrade Tool, click on the Start Downloading button to begin the flashing (hold download button to start the flashing process,the button usually up or down button and plug in your cable to begin flashing).
Step 8: Once flashing is completed, you will be able to see the Green Passed Message in Spreadtrum Upgrade Tool.
Step 9: Now you have successfully flashed your Android Device using Spreadtrum Upgrade Tool.
Once you see the Green Passed Message,Disconnect it and ON your phone.Go to Settings > About Phone > Check firmware.
Then you are Good to go........Enjoy.
thks
ReplyDeleteWelcome V-Tech
Deletethxs boss
ReplyDeleteWelcome brother
DeleteThe best
ReplyDeleteThanks it worked well
ReplyDeleteWelcome,thanks for your feedback
Deletebonjour s'il te plait je peux trouver le firmware de tecno spark 3 kb7 clone MT6570
ReplyDeleteThanks file work fine
ReplyDeleteWelcome,thanks for your feedback
Deletethanks the file works very well keep it up
ReplyDeleteWelcome,thanks for your feedback
Deletetested thanks
ReplyDeletethankx alot
ReplyDelete