Lastest Uploads
Share It
Powered by Blogger.

Friday, 17 April 2020

Download Itel P36 W6501 Factory Stock Pac Firmware Flash File
April 17, 2020 by

This firmware solve issues like 
-Calibration/Touch pad not working after flashing
-Deadboot issues
-Unlocking issues
-Monkey Virus issues
-Hang On Logo
-LCD Blank,Camera Errors,Dead Boot Repair,Unfortunately App Has Stopped
-Frp Lock
-Auto Data-Wifi On
Tested @ My Workshop  Dorado Soft Touch GSM Clinic

File Informations
File Name: {DST-Gsm} Itel P36 W6501-F3111-9.0-OP-V016-20200311_1853
File Size: 1GB
Password: Yes Paid<+2348037277982

File Informations
File Name: {DST-Gsm} Itel W6501-F3111-9.0-OP-V026-20200727
File Size: 1.18GB
Password: Yes Paid<+2348037277982

 These are the instructions to flash .Pac Stock ROM on any android Smartphone using Spreadtrum Upgrade Tool.
Remember: Your Android device should have at least 40-50 percent of battery to perform the flashing process. 
Flash Pac Stock Rom on Android Smartphone 
Step 1: Download and Install Spreadtrum USB Driver on your Computer. If in case Spreadtrum Driver is already installed on your computer then SKIP this Step.
Step 2: Download Stock Rom (.pac) for your Android Device.
Step 3Download and extract Spreadtrum Upgrade Tool on your computer. After extracting,you will be able to see many files.
Step 4: Now, open UpgradeDownload.exe.
Step 5: Once Spreadtrum Upgrade Tool is launched, connect your Android device to the computer (make sure your device is switch off).
Step 6: Once your Smartphone is connected successfully to the computer, click on the Load Packed Button and add the .pac file (stock rom which comes as pac).
Step 7: Once you have successfully added the Pac file in Spreadtrum Upgrade Tool, click on the Start Downloading button to begin the flashing (hold download button to start the flashing process,the button usually up or down button and plug in your cable to begin flashing).
Step 8: Once flashing is completed, you will be able to see the Green Passed Message in Spreadtrum Upgrade Tool.
Step 9: Now you have successfully flashed your Android Device using Spreadtrum Upgrade Tool.
     Once you see the Green Passed Message,Disconnect it and ON your phone.Go to Settings > About Phone > Check firmware.
Then you are Good to go........Enjoy.

Related Articles

Share It

1 comment:

  1. Download SPD USB driver from

    Download the required and Extract(unzip) with WinRar or 7-Zip
    Install SPD USB Driver to your Computer
    open Flash tool folder double click FactoryDownload.exe
    Click on the “load packet button ” select and add the firmware “.pac” inside the extract(unzip) folder and wait for a few seconds this depends on pc speed
    Hit the Start Button
    Now power off your device and connect to pc with a good USB
    wait for flashing to complete.
    Premium SPD Drivers >>>
    Need more Factory Signed Firmware? Vist