-Calibration/Touch pad not working after flashing
-Deadboot issues
-Unlocking issues
-Monkey Virus issues
-Hang On Logo
-LCD Blank,Camera Errors,Dead Boot Repair,Unfortunately App Has Stopped
-Frp Lock
-Auto Data-Wifi On
-Hang On Logo
-LCD Blank,Camera Errors,Dead Boot Repair,Unfortunately App Has Stopped
-Frp Lock
-Auto Data-Wifi On
ETC
File Name: [DST-Gsm] Itel A56 W6004 (W6004-SP591-9.0-OP-V006-20200117)
File Informations
File Name: {DST-Gsm} Itel A56 W6004-SP591-9.0-OP-V013-20200907
File Informations
File Name: {DST-Gsm} Itel A56 W6004 Frp Unlock File ( For Old/First Relased A56 Phone)
File Informations
File Name: Itel A56 W6004-SP591-9.0-OP-V013-20200907 Frp File By DST-Gsm
File Informations
File Name: Itel A56 W6004-SP591-9.0-OP-V014-20201017 FRP Unlock File By DST-Gsm
NOTE: For Frp Unlock File,Always Note Your Device Info By Putting To Recovery....Thanks
HOW TO INSTALL THIS ROM
Remember: Your Android device should have at least 40-50 percent of battery to perform the flashing process.
Flash Pac Stock Rom on Android Smartphone
Step 1: Download and Install Spreadtrum USB Driver on your Computer. If in case Spreadtrum Driver is already installed on your computer then SKIP this Step.
Step 2: Download Stock Rom (.pac) for your Android Device.
Step 3: Download and extract Spreadtrum Upgrade Tool on your computer. After extracting,you will be able to see many files.
Step 4: Now, open UpgradeDownload.exe.
Step 5: Once Spreadtrum Upgrade Tool is launched, connect your Android device to the computer (make sure your device is switch off).
Step 6: Once your Smartphone is connected successfully to the computer, click on the Load Packed Button and add the .pac file (stock rom which comes as pac).
Step 7: Once you have successfully added the Pac file in Spreadtrum Upgrade Tool, click on the Start Downloading button to begin the flashing (hold download button to start the flashing process,the button usually up or down button and plug in your cable to begin flashing).
Step 8: Once flashing is completed, you will be able to see the Green Passed Message in Spreadtrum Upgrade Tool.
Step 9: Now you have successfully flashed your Android Device using Spreadtrum Upgrade Tool.
Once you see the Green Passed Message,Disconnect it and ON your phone.Go to Settings > About Phone > Check firmware.
Then you are Good to go........Enjoy.
password not working
ReplyDeleteWho give you password,Do Call,Text/Chat +2348037277982 for that
Deleteyou add the frp bad file in order sell another one mazafaka
ReplyDeleteThats RUDE brother,you never commented on our file after succefully helping you out but now you make use of Old frp file on new Itel A56 without reading or checking your device info.
DeleteProbably your variant is 2020 between september to december make.
We have updated Itel A56 2020 early september to december FRP UNLOCK FILE That file new A56 frp issues.
All the same,i appreciate you Rude comment.....Africa will always be africa,Thanks.
password pls
ReplyDeletepassword pls
ReplyDelete