Lastest Uploads
Loading...
Share It
Powered by Blogger.

Saturday, 21 December 2019

Download Tecno RB6S Official Pac Factory Firmware With FlashTool 100% Tested
December 21, 2019 by


This firmware solve issues like 
-Calibration/Touch pad not working after flashing
-Deadboot issues
-Unlocking issues
-Monkey Virus issues
-Hang On Logo
-LCD Blank,Camera Errors,Dead Boot Repair,Unfortunately App Has Stopped
-Frp Lock
-Auto Data-Wifi On
ETC
Tested @ My Workshop  Dorado Soft Touch GSM Clinic

File Informations
File Name: (DST-Gsm) RB6S-SU335-8.1-ZA-Voda-LC-V004-20190702
File Size: 634MB
Password:Yes Call,Text/Chat +2348037277982
DOWNLOAD

For Network Unlock Code
Yes Call,Text/Chat +2348037277982 On Whatsapp
Delivery Time: [5-10]MIN 
Bulk Orders Allowed: Yes 
Submit To Verify Allowed: No 
Order Cancel Allowed: Yes (in 2 minutes after making order) 
Service Type: Server Order Type: IMEI 
Order Processing: Manual

HOW TO INSTALL THIS ROM
 These are the instructions to flash .Pac Stock ROM on any android Smartphone using Spreadtrum Upgrade Tool.
Remember: Your Android device should have at least 40-50 percent of battery to perform the flashing process. 
Flash Pac Stock Rom on Android Smartphone 
Step 1: Download and Install Spreadtrum USB Driver on your Computer. If in case Spreadtrum Driver is already installed on your computer then SKIP this Step.
Step 2: Download Stock Rom (.pac) for your Android Device.
Step 3Download and extract Spreadtrum Upgrade Tool on your computer. After extracting,you will be able to see many files.
Step 4: Now, open UpgradeDownload.exe.
Step 5: Once Spreadtrum Upgrade Tool is launched, connect your Android device to the computer (make sure your device is switch off).
Step 6: Once your Smartphone is connected successfully to the computer, click on the Load Packed Button and add the .pac file (stock rom which comes as pac).
Step 7: Once you have successfully added the Pac file in Spreadtrum Upgrade Tool, click on the Start Downloading button to begin the flashing (hold download button to start the flashing process,the button usually up or down button and plug in your cable to begin flashing).
Step 8: Once flashing is completed, you will be able to see the Green Passed Message in Spreadtrum Upgrade Tool.
Step 9: Now you have successfully flashed your Android Device using Spreadtrum Upgrade Tool.
     Once you see the Green Passed Message,Disconnect it and ON your phone.Go to Settings > About Phone > Check firmware.
Then you are Good to go........Enjoy.

Related Articles

Share It

No comments:

Post a Comment