-Calibration/Touch pad not working after flashing
-Deadboot issues
-Unlocking issues
-Monkey Virus issues
-Hang On Logo
-LCD Blank,Camera Errors,Dead Boot Repair,Unfortunately App Has Stopped
-Frp Lock
-Auto Data-Wifi On
-Hang On Logo
-LCD Blank,Camera Errors,Dead Boot Repair,Unfortunately App Has Stopped
-Frp Lock
-Auto Data-Wifi On
ETC
File Informations
File Name: (DST-Gsm) Tecno T901-WM2401-EnFrPoArSwHa-OP-V008-20190726
File Size: 135MB
Password: DST-Gsm
DOWNLOAD
Flashing/Installer Guideline
Password: DST-Gsm
DOWNLOAD
File Informations
File Name: (DST-Gsm) Tecno T901-WM2401-EnFrPoArSwHa-OP-B1B8-V001-20190826
File Size: 135MB
Password: DST-Gsm
DOWNLOAD
Password: DST-Gsm
DOWNLOAD
File Informations
File Name: {DST-Gsm} Tecno T901 MTK6572 KaiOS Dead Boot Firmware And Tool
File Size: 160MB
Password: DeadBoot
DOWNLOAD
Password: DeadBoot
DOWNLOAD
Note: Flash With Tool Provided 100%,Do Contact Us If There Is Any Problem
Flashing/Installer Guideline
1st Step: Download Your Targeted Flash File/Stock Rom. Recheck Your Model & Version.
4th Step: Unzip download flash firmware/Stock Rom.
5th Step: Setup Usb Android Mediatek smartphone Driver.(Skip Already Install driver.)
6th Step: Setup/open Mediatek smartphone Flash Tools.
7th Step: Open Smartphone (SP) Flash Tool.
8th Step: Load your Targeted model scatter/Document file.Then All File Auto Select .
9th Step: Battery Charge minimum 50%.Its important issue for Flash.
10th Step:Connect Usb Cable with Pc.
11th Step: Press Flash/Download/Upgrade Button.
12th Step: Reconnect Battery.
13 Step: Press Volume – or Boot key & inset usb Cable.
14th Step: Wait 3-8 Minute For Flash Done
1st Step: Download Your Targeted Flash File/Stock Rom. Recheck Your Model & Version.4th Step: Unzip download flash firmware/Stock Rom.5th Step: Setup Usb Android Mediatek smartphone Driver.(Skip Already Install driver.)6th Step: Setup/open Mediatek smartphone Flash Tools.7th Step: Open Smartphone (SP) Flash Tool.8th Step: Load your Targeted model scatter/Document file.Then All File Auto Select .9th Step: Battery Charge minimum 50%.Its important issue for Flash.10th Step:Connect Usb Cable with Pc.11th Step: Press Flash/Download/Upgrade Button.12th Step: Reconnect Battery.13 Step: Press Volume – or Boot key & inset usb Cable.14th Step: Wait 3-8 Minute For Flash Done
16 Comments
Thanks man,you save my ass
ReplyDeleteHahaha,Bless God brother
Deleteam requesting for a password plizz
ReplyDeleteSorry brother,do contact us for that via whatsapp +2348037277982
DeleteDue to high demand,Password provided.......Enjoy
ReplyDeletePassword sir
ReplyDeletePassword already provided....read write up
DeleteHow to changer the orientaation sit after flash the screen turn upside down
ReplyDeleteUse the other file.....it will fix it but always make a backup of your device
DeleteOk thanks for your swift reapond
ReplyDeleteWorks fine now thanks
ReplyDeleteWelcome...bless God
Deletepassword pls
ReplyDeleteWhat you needed is there free
Deletebe blessed man you saved out of trap
ReplyDeleteBless God
Delete