This firmware solve issues like
-Calibration/Touch pad not working after flashing
-Deadboot issues
-Unlocking issues
-Monkey Virus issues
-Hang On Logo
-LCD Blank,Camera Errors,Dead Boot Repair,Unfortunately App Has Stopped
-Frp Lock
-Auto Data-Wifi On
-Hang On Logo
-LCD Blank,Camera Errors,Dead Boot Repair,Unfortunately App Has Stopped
-Frp Lock
-Auto Data-Wifi On
File Name: {DST-Gsm} Gionee F103 MT6735
Password: Zukky
All Variant Supported
File Informations
File Name: {DST-Gsm} Gionee F103 MT6735 Play Store Firmware 100% Tested {UKmobile}
Password: DST-Gsm
DOWNLOAD
All Variant Supported
Flashing/Installer Guideline
1st Step: Download Your Targeted Flash File/Stock Rom. Recheck Your Model & Version.4th Step: Unzip download flash firmware/Stock Rom.5th Step: Setup Usb Android Mediatek smartphone Driver.(Skip Already Install driver.)6th Step: Setup/open Mediatek smartphone Flash Tools.7th Step: Open Smartphone (SP) Flash Tool.8th Step: Load your Targeted model scatter/Document file.Then All File Auto Select .9th Step: Battery Charge minimum 50%.Its important issue for Flash.10th Step:Connect Usb Cable with Pc.11th Step: Press Flash/Download/Upgrade Button.12th Step: Reconnect Battery.13 Step: Press Volume – or Boot key & inset usb Cable.14th Step: Wait 3-8 Minute For Flash Done
1st Step: Download Your Targeted Flash File/Stock Rom. Recheck Your Model & Version.4th Step: Unzip download flash firmware/Stock Rom.5th Step: Setup Usb Android Mediatek smartphone Driver.(Skip Already Install driver.)6th Step: Setup/open Mediatek smartphone Flash Tools.7th Step: Open Smartphone (SP) Flash Tool.8th Step: Load your Targeted model scatter/Document file.Then All File Auto Select .9th Step: Battery Charge minimum 50%.Its important issue for Flash.10th Step:Connect Usb Cable with Pc.11th Step: Press Flash/Download/Upgrade Button.12th Step: Reconnect Battery.13 Step: Press Volume – or Boot key & inset usb Cable.14th Step: Wait 3-8 Minute For Flash Done