Download Tecno Camon CM CA6 Official Signed Factory Firmware 100% Tested

This firmware solve issues like 

-Calibration/Touch pad not working after flashing

-Deadboot issues

-Unlocking issues

-Monkey Virus issues

ETC

Tested @ My Workshop  Dorado Soft Touch GSM Clinic

File Informations

File Name: [DST-Gsm] Tecno CA6 Signed Firmware 100% Clean (H3721AC-N-180130V34)

File Size: 1.9GB
Password:  Yes< Paid +2348027277982
DOWNLOAD
...................................................................................................................................................................

File Informations

File Name: [DST-Gsm] Tecno CA6 Signed Firmware 100% Clean (H3721B-N-180117V34)

File Size: 1.9GB
Password:  Yes< Paid +2348027277982

DOWNLOAD

...................................................................................................................................................................

File Informations

File Name: {DST-Gsm} CA6-H3721G-N-171211V55 100%

File Size: 1.9GB
Password:  Yes< Paid +2348027277982
DOWNLOAD

Tools For This Firmwares

-SP Tool Lastest Version,Use On Only The First Firmware (Note Your Variant before flashing)
-MTK Official Tool DOWNLOAD Can be used on any of the tool 100% Tested

HOW TO FLASH USING SP TOOL FLASHER
YOU HAVE TO PUT TECNO CAMON CA6 DA FILE  ON DOWNLOAD AGENT SITUATED ABOVE WHERE YOU CLICK TO LOAD YOUR SCATTER FILE {DOWNLOAD AGENT},YOU CAN ALSO DOWNLOAD IT FROM HERE

Text/Call Or Chat Us On Whatsapp On +2348037277982 For The Password If There Is Any.

 Firmware Fixed Below Issues

Pattern Lock solution.

Password Lock Problem Fixed.

Privacy Lock Solution.

Application Lock Solution.

Screen Lock Problem Fixed.

FRP Lock (Google Account Lock) (Type Email & Password & Press Next) Problem Fixed.

Hang On Logo Problem Fixed.

Dead phone Recovery.

Unfortunately, Any Apps has Been Stoped.

Heat Problem Fixed.

Auto On Off Problem Solution.

White Screen Problem Solution.

Blank OR Black Screen Problem Fixed.

Flashing/Installer Guideline

1st Step: Download Your Targeted Flash File/Stock Rom. Recheck Your Model & Version.

2nd Step: Download Smartphone (SP) Flash Tools Or Supported Flash Tools.

3rd Step: Download Mediatek Usb Driver.Must be Your smartphone Model Supported

4th Step: Unzip download flash firmware/Stock Rom.

5th Step: Setup Usb Android Mediatek smartphone Driver.(Skip Already Install driver.)

6th Step: Setup/open Mediatek smartphone Flash Tools.

7th Step: Open Smartphone (SP) Flash Tool.

8th Step: Load your Targeted model scatter/Document file.Then All File Auto Select .

9th Step: Battery Charge minimum 50%.Its important issue for Flash.

10th Step:Connect Usb Cable with Pc.

11th Step: Press Flash/Download/Upgrade Button.

12th Step: Reconnect Battery.

13 Step: Press Volume – or Boot key & inset usb Cable.

14th Step: Wait 3-8 Minute For Flash Done