Download Huawei SCL U31 Flashtool Stock Rom Firmware 100% Tested


This firmware solve issues like 
-Calibration/Touch pad not working after flashing
-Deadboot issues
-Unlocking issues
-Monkey Virus issues
ETC
Tested @ My Workshop  Dorado Soft Touch GSM Clinic

File Informations
File Name:
MT6572_EMMC_SCL U31_09_29_2017_10_31_18.rar
File Size: 402MB
Password: www.mobilekse.com
DOWNLOAD

Flashing/Installer Guideline
1st Step: Download Your Targeted Flash File/Stock Rom. Recheck Your Model & Version.
2nd Step: Download Smartphone (SP) Flash Tools Or Supported Flash Tools.
3rd Step: Download Mediatek Usb Driver.Must be Your smartphone Model Supported
4th Step: Unzip download flash firmware/Stock Rom.
5th Step: Setup Usb Android Mediatek smartphone Driver.(Skip Already Install driver.)
6th Step: Setup/open Mediatek smartphone Flash Tools.
7th Step: Open Smartphone (SP) Flash Tool.
8th Step: Load your Targeted model scatter/Document file.Then All File Auto Select .
9th Step: Battery Charge minimum 50%.Its important issue for Flash.
10th Step:Connect Usb Cable with Pc.
11th Step: Press Flash/Download/Upgrade Button.
12th Step: Reconnect Battery.
13 Step: Press Volume – or Boot key & inset usb Cable.
14th Step: Wait 3-8 Minute For Flash Done

6 Comments

  1. the password doesn't work. please can you give the correct password? thank's before.

    ReplyDelete
  2. Sir the password is working perfectly,typ it correctly......No cap lock

    ReplyDelete
  3. Replies
    1. You are welcome Engr Eze,Thanks for your comment.....it encourage us to keep doing

      Delete
  4. Thanks Admin........Thumb up

    ReplyDelete