Lastest Uploads
Share It

Tuesday, 29 August 2017

Download Solo Aspire 1c Stock Rom (Flash File)
August 29, 2017 by


ROM Mobile Solo Aspire 1c – ROM Android 5.1
Update Official ROM Solo Aspire 1c version: Android_V10_20160612 – S1170-user 5.1 LMY47 – c115b-dk-s1170-wg-wvga-32g4g-solo-bom13

Official ROM Solo Aspire 1c version: Android_V03_20160513 – S1170-user 5.1 LMY47 – c115b-dk-s1170-wg-wvga-32g4g-solo-bom13
Gapps include – No Rooted
Language support: Multilang
Install ROM 
- Unpack FlashTools, and Click on Flash_tool.exe
- Select "scatter-Loading" and search MT6572_Android_scatter.txt in ROM
- Wait file to be added into Flash Tool
- Select "Download Only" or if upgrade "Firmware upgrade"
- Turn off your phone, remove the battery (if the battery is removable) and replace it after some seconds (and don't turn on the phone).
- Press “Download” button to start
- and connect your phone into the computer via USB data cable.
- The process will start and a red progress bar will appear after color purple, yellow.
- And green circles display
- Finish !
- You can now safely disconnect your phone and turn it on.

Tested and confirmed by me @ my work place Dorado Soft touch Gsm Clinic but is adviceable to make a backup of your device before installing or updating ROM Using MIRACLE BOX or any chinese box

Flashing/Installer Guideline

1st Step: Download Your Targeted Flash File/Stock Rom. Recheck Your Model & Version.
2nd Step: Download Smartphone (SP) Flash Tools Or Supported Flash Tools.
3rd Step: Download Mediatek Usb Driver.Must be Your smartphone Model Supported
4th Step: Unzip download flash firmware/Stock Rom.
5th Step: Setup Usb Android Mediatek smartphone Driver.(Skip Already Install driver.)
6th Step: Setup/open Mediatek smartphone Flash Tools.
7th Step: Open Smartphone (SP) Flash Tool.
8th Step: Load your Targeted model scatter/Document file.Then All File Auto Select .
9th Step: Battery Charge minimum 50%.Its important issue for Flash.
10th Step:Connect Usb Cable with Pc.
11th Step: Press Flash/Download/Upgrade Button.
12th Step: Reconnect Battery.
13 Step: Press Volume – or Boot key & inset usb Cable.
14th Step: Wait 3-8 Minute For Flash Done

Related Articles

Share It

No comments:

Post a Comment