Lastest Uploads
Share It
Powered by Blogger.

Saturday, 26 October 2019

YU5510A Dead Boot Fix Firmware 100% Tested
October 26, 2019 by

Download YU5510A Flash File
YGDP tool (v3.98)

1- Download the latest YGDP tool (v3.98).
2- Install ADB driver.
3- Now, connect mobile to PC.
4- Open device manager and confirm your mobile has been identified by PC.
5- Unzip tool and run the setup.
6- When tool interface appears, enter 369 as password.
7- Click on Login to use the tool.
8- Click on Config and select CPU model.
9- Click on CPB file and assign the path of firmware.
10- Switch off Mobile, connect it to PC by holding Volume UP key then connect USB cable.
11- Click on start.
12- Flashing starts and when completed Cell 0 will turn in to green color.

Important Notes
[*] Back Up Your Data: You should always back up your data before you begin flashing new firmware files to your smartphone or tablet. All of your pictures, music, videos, documents, etc. should be still on your device after you have updated the firmware, but you may need to restore the contacts and applications from a backup.
[*] Wipe Cache and Factory Reset: Some people claim that taking a factory reset isn’t necessary after updates, but at the very least you should wipe the system cache after installing new firmware. This way you can help eliminate any performance issues and battery draining bugs. Taking a factory reset is the best way of avoiding common problems many users face after applying software updates.

Related Articles

Share It

No comments:

Post a Comment