Download Qmobile K650 SPD6531 Flash File/Firmware 100% Tested


Operation : Read FullFlash [ v1.27 ]
1. Remove battery. Insert USB cable
2. Press and hold BootKey ( Skip, if use BootCable )
3. Insert battery

 ====  Wait for phone...

Phone found! [ 48 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending boot ... 
Boot Sent , starting...
Boot Ver : Spreadtrum Boot Block version 1.2
Boot Ok
CPU ID : 6531 , FDLStat : 0100
[0] Flash DIE : 00C8 0060 0016 0000
[0] Flash VEN : GigaDevice , GD25LQ32
[0] Flash CAP : 00400000
Read Flash Content
Read Ok , collect info
Set FileInfo : 
Model Vendor : q
Model Name   : K650
ExtInfo Data : SPD
Saved to : C:\Program Files\CM2SPD\Read_out\SPD6531_00400000_GD25LQ32_SPD__q-K650.bin
Done!

Elapsed: 00:00:35


How to Flash
QMobile Paris SC6531
Download and install SPD USB Mobile drivers
Download Flash File From Link and extract it
Open supported box setup / Dongle.
Select Correct Mobile CPU type From Setup and Choose flash file.
Turn off the Mobile, remove the battery.
Connect the Cellphone with USB data cable through Computer and insert Mobile battery again.
Press and hold Mobile Boot Key
Click on flash & then wait for the complete flash
Complete of Flash remove USB data cable and power on the device.
Enjoy it has done.

0 Comments