Download Qmobile G6 MT6261 Flash File/Firmware 100% Tested


Device Info
Operation : Flash [ v1.58 ]
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )
Wait for phone...
Phone found! [ 47 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : 88E75AC84DEB2F33F22305BC7D1FC057
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x8E
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x0113 , [Winbond] SF_W25Q32JV
[0] : FLASH_DIE : 00EF 0070 0016 0000
[0] : FLASH_LEN : 0x00400000
INT_RAM : 0x0000D000
EXT_RAM : 0x00400000

File_Info   : RDR61D_F161_PCB01_gprs_MT6261_S00.A608_QMOBILE_G6_V09_P_20170919.bin
FileVersion : A608_QMOBILE_G6_V09_P_20170919
Flash now

Erase region , wait ...
Write data , wait ...
Write : RDR61D_F161_PCB01_gprs_MT6261_S00.A608_QMOBILE_G6_V09_P_20170919.bin

Done!
Elapsed: 00:00:37
Reconnect Power/Cable!

DOWNLOAD

1: Download   Flash File Qmobile G6  from Google Drive link.
2 : Download and install Mtk Drivers
3: Exrtract to winrar flash file zip file
4 :Open cm2 Dongle and select platform mtk
5 : Click flash Tab and then click Bin file tab and open your flash file save your computer path.
6 :  Click flash and wait to full flash Done...!

0 Comments