Download Qmobile F2 MT6261 Flash File/Firmware 100%Tested


DEVICE INFORMATION
Wait for phone...
Phone found! [ 47 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : 91282BE60BA3E4D9061E94ACF7D0F5B9
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x8E
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x0112 , [MXIC] MX25L3291FWJI_09
[0] : FLASH_DIE : 00C2 0020 0016 0000 
[0] : FLASH_LEN : 0x00400000
SDS_INFO : 0x003FE000 , 0x00002000
INT_RAM : 0x0000D000
EXT_RAM : 0x00400000
Reading Flash Content now ... 

Read Flash now
Read Ok , 4194304 bytes read
Check and collect compile info
File_Info   : MXWD017_D_HL_M259_QMOBILE_PCB01_gprs_MT6261_S00.QMOBILE_F2_V07_10_04_2017.bin
FileVersion : QMobile_F2_V07_10_04_2017
Saved to : C:\Program Files\CM2MTK\Read_out\MXWD017_D_HL_M259_QMOBILE_PCB01_gprs_MT6261_S00.QMOBILE_F2_V07_10_04_2017.bin

Done!
Elapsed: 00:00:15
Reconnect Power/Cable!


1: Download Flash File Q mobile F2 MT6261  from above
2 : Download and install Mtk Drivers 
3: Exrtract To winrar  flash file zip file 
4 :Open cm2 Dongle and select  Platform mtk
5 : Click flash Tab and then click Bin file tab and open your flash file save your computer path. 
6 :  Click flash and wait to full flash Done...!

0 Comments