Download Infinix X606B Signed Factory Firmware v8.1 100% Tested
Password: Free
DOWNLOAD
NOTE: IF YOU GOT ERROR LIKE "Auth_Handle _Is_Not _Ready(5000) {User} This Is A Secure Base-Band Chip Please Select Authentication File First" YOU HAVE TO PUT INFINIX X606 DA FILE ON DOWNLOAD AGENT SITUATED ABOVE WHERE YOU CLICK TO LOAD YOUR SCATTER FILE {DOWNLOAD AGENT},YOU CAN ALSO DOWNLOAD IT FROM HERE
Text/Call Or Chat Us On Whatsapp On +2348037277982 For The Password If There Is Any.
Firmware Fixed Below Issues
Flashing/Installer Guideline
1st Step: Download Your Targeted Flash File/Stock Rom. Recheck Your Model & Version.
4th Step: Unzip download flash firmware/Stock Rom.
5th Step: Setup Usb Android Mediatek smartphone Driver.(Skip Already Install driver.)
6th Step: Setup/open Mediatek smartphone Flash Tools.
7th Step: Open Smartphone (SP) Flash Tool.
8th Step: Load your Targeted model scatter/Document file.Then All File Auto Select .
9th Step: Battery Charge minimum 50%.Its important issue for Flash.
10th Step:Connect Usb Cable with Pc.
11th Step: Press Flash/Download/Upgrade Button.
12th Step: Reconnect Battery.
13 Step: Press Volume – or Boot key & inset usb Cable.
14th Step: Wait 3-8 Minute For Flash Done
1st Step: Download Your Targeted Flash File/Stock Rom. Recheck Your Model & Version.4th Step: Unzip download flash firmware/Stock Rom.5th Step: Setup Usb Android Mediatek smartphone Driver.(Skip Already Install driver.)6th Step: Setup/open Mediatek smartphone Flash Tools.7th Step: Open Smartphone (SP) Flash Tool.8th Step: Load your Targeted model scatter/Document file.Then All File Auto Select .9th Step: Battery Charge minimum 50%.Its important issue for Flash.10th Step:Connect Usb Cable with Pc.11th Step: Press Flash/Download/Upgrade Button.12th Step: Reconnect Battery.13 Step: Press Volume – or Boot key & inset usb Cable.14th Step: Wait 3-8 Minute For Flash Done
No comments:
Post a Comment